WattMizer PLUS PRO X2 10.0 up to 30,000 gallons

The WattMIzer PLUS PRO Series of Upper-End Filtration Systems were designed for people who wanted the Best Filtration for their pond and fish.

These systems come with the items that are most needed for complete filtration satisfaction:

1. Prefiltration with 2 AquaSieve2 units for both a bottom drain circuit and a skmmer circuit. There are 2 pumps on this system- each an Artesian2 3/4 HF High Flow Pump. One for the Skimmer circuit and one for the Bottom drain circuit.
2. Energy efficient movement of water is accomplished by the Tried and True Performance Pro brand of pumps. These pumps have 3 year warranties on them. The best in the business. This system uses 2 of the Performance Pro Artesian2 3/4 HP HF HIGH FLOW low amp pumps for energy efficiency.
3. The BioMechanical filtraton process is handled by one of our 3 Main Upper end filtration filters. You have a choice between the AquaBead, AlphaONE or the new AlphaNANO filters. This system uses the X2 10.0 Cu. Ft. filter, with the most popular being the AlphaONE X2 10.0 filter. These filters polish the water as well as handle nitrification in one highly efficeint component. Need help deciding which one is better for your needs? Just give us a call, we're happy to help you decide. 
4. The final phase of the filtration circuit is accomplished by the water passing through 2 High Intenisty ZapPRO UV lights. These units each produce 116 High Output watts of power to help rid the pond of unwanted algae, virus etc. The easiest UV light we know of for ease of maintenance. 
5. All of these components are then plumbed together, connections marked, and then disassembled for easy set up at their final location. The system goes together in just a few minutes and fits into a space of 48" front to back and 72" side to side.

The WattMizer PLUS PRO Systems give it all to you in one easy self-contained system that only needs about 5 minutes a week of attention.

FAQs

Q1: What is the purpose of using two pumps in this system?
A: Each 3/4 HP Artesian2 HF pump independently supports one of the two intake circuits (skimmer and bottom drain), allowing balanced flow and efficient performance through the X2 filter.

Q2: What makes the AlphaONE X2 10.0 filter different from standard filters?
A: The X2 design enables two pumps to share one high-capacity filter without flow restriction. It combines mechanical debris removal and biological nitrification, reducing the need for separate systems.

Q3: Why are there two UV lights?
A: With dual water lines feeding the system, two 116-watt ZapPRO UV units ensure maximum sterilization capacity for large ponds. This setup significantly reduces algae and pathogen levels.

Q4: What’s the setup space required?
A: The full system fits into a 48" (front to back) by 72" (side to side) footprint.

Q5: How easy is the system to set up?
A: It’s pre-plumbed and marked, making reassembly at your site fast and simple. No professional plumbing needed for installation.

Q6: How much maintenance does the system need?
A: Only about 5 minutes per week. The system is designed for easy backwashing, UV lamp access, and minimal filter clogging.

Q7: Can I customize the filter model or pump size?
A: Absolutely! We're happy to help you tailor the system with different filter models or pump capacities depending on your pond’s needs.